The Stainless Steel 10 PSI Gas Regulator Kit is designed to be used with high pressure outdoor burners. The unique feature about this regulator is its stainless steel braided hose. It is almost impossible to ruin this high pressure hose. Pound it, burn it and try to cut it with a knife and it will not budge. The Stainless Steel 10 PSI Gas Regulator Kit includes a 30 inch high pressure stainless steel hose, which is the standard length of a gas hose and has been found to be the safest length. The regulator on this hose kit has 10 PSI (pounds per square inch). The BTUs for this regulator kit is 55,000 BTUs and is still considered high pressure. (Compared to 185,000 20 PSI regulators). This kit also includes a brass control valve also known as a needle valve. Some designs of the needle valve may vary. The orifice on the gas regulator kit is a ¼” male orifice connector which is the standard size to fit most of your outdoor outdoor burners. This particular gas regulator kit is made for Bayou Classic’s single burner cookers (preferably the SQ14 and 1114). NOT for use on gas grills.